Departmental Publications

PPD Faculty Research Publications

Prof. Dr. Saud Hashmi

Publications:

Cumulative Impact Factor : 59

International Journal Papers

  1. Awan Zahoor, Zafar Khan Ghouri, Saud Hashmi, Faizan Raza, Shagufta Ishtiaque, Saad Nadeem, Inayat Ullah, and Kee Suk Nahm,”Electrocatalysts for the Lithium air batteries: Current status and the challenges”. ACS Sustainable Chemistry & Engineering Publish online 02 Aug 2019  I.F: 6.2
  2. Hashmi S, Saad Nadeem, Awan Zahoor, Adeel ur Rehman, Ahsen Abdul Ghani “Synthesis, Applications and Swelling Properties of Poly (Sodium Acrylate-Coacrylamide) Based Superabsorbent Hydrogels”  Journal of the Chemical Society of Pakistan (J CHEM SOC PAKISTAN), Volume 41, No. 05, October 2019  I.F: 0.28 (In Press).
  3. Syed KazmiZahoor Awan , Saud Hashmi “Simulation Study of Ionic Liquid Utilization for Desulfurization of Model Gasoline” Iranian Journal of Chemistry and Chemical Engineering. 04 July 2019  I.F: 1.01 (In Press)
  4. Hashmi S, Awan Zahoor, Zafar Khan Ghouri “Thermo-Rheological Complexity of Novel Branch Polyethylene Synthesized by High Performance Bulky -Diimine Nickel (II) Catalysts”, Materials Focus, Vol. 7, pp. 1–9,  August 1, 2018.
  5. Bilal Kazmi, Awan Zahoor, Hashmi SViability of Shale Gas and CO2 Removal using 1-Butyl-3-Methylimidazolium Tetrafluoroborate”, International Journal of Innovative Science and Research Technology, Volume 3, Issue 5, May – 2018
  6. Bilal Kazmi, Awan Zahoor, Hashmi S, Zafar Khan Ghouri "Desulfurization of the dibenzothiophene (DBT) by using imidazolium-based ionic liquids(Ils)" Materials Physics and Chemistry  April-(2018) Volume 2.
  7. Zahoor Awan , Zafar Khan Ghouri , Hashmi S "Influence of Ag nanoparticles on state of the art MnO2 nanorods performance as an electrocatalyst for lithium air batterie" Hydrogen Energy, Volume 43, Issue 5, 1 February (2018), Pages 2930-2942. IF:3.5
  8. Mohammad Vatankhah-Varnoosfaderani, Hashmi S, Florian J. Stadler, Amin GhavamiNejad ” Mussel-inspired 3D networks with stiff-irreversible or soft-reversible characteristics - It's all a matter of solvent” Polymer Testing, Volume 62, Pages 96-101, Available Online June 2017 IF: 2.24
  9. Stadler FJ, Hashmi S, GhavamiNejad A, Vatankhah-Varnoosfaderani M , " Rheology of dopamine containing polymers ", ANNUAL TRANSACTIONS OF THE NORDIC RHEOLOGY SOCIETY, VOL. 25, 2017.
  10. Hashmi S, GhavamiNejad A, , Mohammad Vatankhah-Varnoosfaderani, Florian J. Stadler “Effect of H2O and reduced graphene oxide on the structure and rheology of self-healing, stimuli responsive catecholic gels” Rheologica Acta, Volume 55, Issue 2, pp 163–176, February 2016 IF: 1.8
  11. Mohammad Vatankhah-Varnoosfaderani,Amin GhavamiNejad,Hashmi S,Florian J. Stadler “Hydrogen Bonding in Aprotic Solvents, a New Strategy for Gelation of Bioinspired Catecholic Copolymers with N –Isopropylamide”,Macromolecular Rapid Communication, Volume 36, Issue 5, pages 447452, March 2015 IF: 4.6.
  12. Hashmi S, Mohammad Vatankhah-Varnoosfaderani, Amin GhavamiNejad, Francis O. Obiweluozor,Bing Du,Florian J. Stadler,” Self-associations and temperature dependence of aqueous solutions of zwitterionically modified N-isopropylacrylamide copolymers”, Rheologica Acta, DOI 10.1007/s00397-015-0837-z,February 2015 IF: 1.8.
  13. Hashmi S, GhavamiNejad A, Stadler FJ,” Oscillations in modulus in solutions of graphene oxide and reduced graphene oxide with grafted poly-N-isopropylamide”, Soft Matter, 2015,11, 1315-1325 IF: 4.2
  14. G. Gnana Kumar , Hashmi S, C. Karthikeyan, Amin GhavamiNejad, Mohammad Vatankhah-Varnoosfaderani, Florian J. Stadler, “Carbonaceous nanocomposite hydrogels – versatile building blocks for microbial fuel cell applications”,Macromolecular Rapid Communication,Volume 35, Issue 21, pages 18611865, November 2014 IF: 4.6
  15. GhavamiNejad A, Hashmi S, Mohammad Vatankhah-Varnoosfaderani, Florian J. Stadler,” Network formation in graphene oxide composites with surface grafted PNIPAM chains in aqueous solution characterized by rheological experiments”, Phys. Chem. Chem. Phys., 2014,16, 8675-8685. IF: 3.8
  16. Francis O. Obiweluozor, Amin GhavamiNejad, Hashmi S, Mohammad Vatankhah-Varnoosfaderaniand, Florian J. Stadler, “A NIPAM–Zwitterion Copolymer: Rheological Interpretation of the Specific Ion Effect on the LCST”, Macromolecular Chemistry and Physics, 2014, DOI: 10.1002/macp.201300778. IF: 2.3
  17. Mohammad Vatankhah-Varnoosfaderani, Hashmi S, Amin GhavamiNejad, Florian J. Stadler, “Rapid Self-Healing and Triple Stimuli Responsiveness of a Supramolecular Polymer Gel Based on Boron-Catechol Interactions in a Novel Water-Soluble Mussel-Inspired Copolymer”, Polym. Chem., 2014,5, 512-523 IF: 5.4
  18. Mohammad-Vatankhah-Varnoosfaderani, Amin GhavamiNejad, Hashmi S, Florian J. Stadler “Mussel-Inspired pH-triggered Reversible Foamed Gel – the Surprising Effect of Water”, Chemical Communications 2013, 49, 41, 4685-4687. IF: 6.3
  19. Hashmi S, GhavamiNejad A, Obiweluozor F, Vatankhah-Varnoosfaderani M, Stadler FJ, "Supramolecular Interaction Controlled Diffusion Mechanism and Improved Mechanical Behavior of Hybrid Hydrogel Systems of Zwitterions and CNT", Macromolecules, 2012, 45 (24),pp 9804–9815. IF: 5.5
  20. Hashmi S, Obiweluozor F, GhavamiNejad A, Vatankhah-Varnoosfaderani M, Stadler FJ, "On-line Observation of Hydrogels during Swelling and LCST-induced changes", Korea-Australia Rheology Journal, 2012, 24, 3, 191-198. IF:1.2

Dr. Rafiq Ahmed

Publiations:

1. Dissertation: Poly(lactic acid) stereocomplex formation in the melt: limitations

and prospectives (ISBN: 978-90-386-2890-5) – Rafiq Ahmed

2. “Poly(lactic acid) stereocomplex formation in the early stages of melt extrusion (from solid stateblend)” R. Ahmed; D.G. Hristova-Bogaerds; P.J. Lemstra. (To be submitted)

3. “Poly(lactic acid) stereocomplex formation in the melt: Stereocomplexation in the homogeneouslymixed blends” R. Ahmed; D.G. Hristova-Bogaerds; P.J. Lemstra. (To be submitted)

4. “Poly(lactic acid) stereocomplex formation in the melt: Effect of Flow and Melt Memory

R. Ahmed; D.G. Hristova-Bogaerds; P.J. Lemstra. (To be submitted)

5. “Enhanced PLA stereocomplex formation in the melt processed binary PDLA/PLLA blends viananocomposite formation” R. Ahmed; D.G. Hristova-Bogaerds; P.J. Lemstra. (To be submitted)

Dr. Junaid Akhlas

1.Akhlas J, Ruggeri F, Bertucco A (2015). Simulation of Steam Gasification of Coal with PreCombustion enabling Cleaner Coal Conversion. In: ICheaP 12, International Conference on Chemical & Process Engineering. Chemical Engineering Transactions, vol. 43, p. 2017-2022, Milan, 19-22 May 2015. DOI: 10.3303/CET1543337

2.Akhlas J, Baesso S, Bertucco A, Ruggeri F (2015). Coal gasification by indirect heating in a single moving bed reactor: Process development & simulation. AIMS Energy, vol. 3(4), p. 635-665, ISSN: 2333-8334. DOI: 10.3934/energy.2015.4.635

3.Akhlas J, Bertucco A, Ruggeri F, Guido C (2017). Treatment of Wastewater from Syngas Wet Scrubbing – Model-based Comparison of Phenol Biodegradation Basin Configurations. The Canadian Journal of Chemical Engineering. DOI: 10.1002/cjce.22848

Publications Contribution:

S. No.

Authors

Title

Conference/Journal

1

Asim Mushtaq, Hilmi Mukhtar and Azmi Mohd Shariff

Solubility Parameter Study of Polysulfone, Polyvinyl Acetate in Dimethylacetamide Solvent

Journal of the Chemical Society of Pakistan, Volume 41, No. 01, (2019): 203-206

2

Asim Mushtaq, Hilmi Mukhtar and Azmi Mohd Shariff

Properties and Characteristic of Amine-Polymer Blend Membrane

Journal of the Chemical Society of Pakistan, Volume 41, No. 02, (2019): 230-239

3

Asim Mushtaq, Hilmi Mukhtar and Azmi Mohd Shariff

Performance of Enhanced Polymeric Blend Membranes for the separation of CO2/CH4 mixtures

Afinidad Journal, Volume 76, No. 586, (2019): 70-75

4

hmed Ullah, Asim Mushtaq, Rizwan Ahmed Qamar, Zaeem Uddin Ali

Extraction of Soil Conditioners From Food Waste” Science International-Lahore

Volume 31, No. 02, (2019): 347-354.

5

Asim Mushtaq, Hilmi Mukhtar and Azmi Mohd Shariff

Performance Enhancement of Polymeric Blend Membranes Incorporation of Methyl Diethanol amine for CO2/CH4 Separation”

  1. Journal of the Chemical Society of Pakistan, Manuscript No: JCSP-281217-11749 Volume 41, No. 03, (2019): 523-530.

 

6

Ahmed Ullah, Asim Mushtaq, Rizwan Ahmed Qamar, Zaeem Uddin Ali

Study of Facility Design for Conversion of Glucose to High Fructose Corn Syrup

Science International-Lahore, Volume 31, No. 03, (2019): 465-472.

 

 

7

Ahmed Ullah, Asim Mushtaq, Rizwan Ahmed Qamar, Zaeem Uddin Ali

Waste Heat Recovery from Stack Gases in a Cement Plant”

Science International-Lahore, Volume 31, No. 04, (2019): 555-567.

 

8

Asim Mushtaq, Hilmi Mukhtar and Azmi Mohd Shariff,

Modelling for Gas Transport in Enhanced Polymeric Blend Membrane”

Journal of the Chemical Society of Pakistan, Volume 41, No. 04, (2019): 613-632.

 

9

Rizwan Ahmed Qamar, Asim Mushtaq, Ahmed Ullah, Zaeem Uddin Ali

“PRODUCTION OF FUEL GRADE ETHANOL FROM CELLULOSE USING ASPEN PLUS- SIMULATION”

Science International-Lahore, Volume 31, No. 05, (2019): 683-694.

 

10

Rizwan Ahmed Qamar, Asim Mushtaq, Ahmed Ullah, Zaeem Uddin Ali

“ELECTROCHEMICAL CONVERSION OF CARBON DIOXIDE TO DIFFERENT HYDRO CARBONS

Science International-Lahore, Volume 31, No. 06, (2019): 869-883.

 

11

Rizwan Ahmed Qamar, Asim Mushtaq, Ahmed Ullah, Zaeem Uddin Ali

TURBINE-POWERED AIR WATER GENERATOR” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences,

Volume 64, No. 01, (2019): 43-62

12

Asim Mushtaq, Ahmed Ullah, Rizwan Ahmed Qamar, Zaeem Uddin Ali

Carbon Capture Process From Cement Industry

Science International-Lahore, Volume 32, No. 01, (2020): 75-88.

 

13

Ahmed Ullah, Asim Mushtaq, Rizwan Ahmed Qamar, Zaeem Uddin Ali

Designing of Advanced Solar Absorption Chilling Unit” International Journal of Engineering and Technology (UAE)

Volume 09, No. 02, (2020): 284-298.

 

14

Ahmed Ullah, Asim Mushtaq, Zaeem Uddin Ali, Rizwan Ahmed Qamar, Ahmed ul Bari, Hashir Izhar, Hussain Ahmed, Sameer Ahmed

Spatially Constrained Treatment of Raw Sewage to Produce Water for Domestic Use”

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Volume 67, No. 01, (2020): 66-92.

 

15

Rizwan Ahmed Qamar, Asim Mushtaq, Ahmed Ullah, Zaeem Uddin Ali

Aspen HYSYS Simulation of CO2 Capture for the Best Amine Solvent

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Volume 68, No. 02, (2020): 124-144.

 

16

Asim Mushtaq, Hilmi Mukhtar and Azmi Mohd Shariff,

Recent Development of Enhanced Polymeric Blend Membranes in Gas Separation:

A Review” Journal of the Chemical Society of Pakistan, Volume 42, No. 02, (2020): 282-304.

17

Rizwan Ahmed Qamar, Asim Mushtaq, Ahmed Ullah, Zaeem Uddin Ali

Designing of Underground Coal Gasification Unit

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Volume 71, No. 02, (2020): 103-133.

 

18

Rizwan Ahmed Qamar, Asim Mushtaq, Ahmed Ullah, Zaeem Uddin Ali

Simulation of Liquefied Petroleum Gas Recovery From Off Gases In A Fuel Oil Refinery

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Volume 73, No. 01, (2020): 109-130.

 

19

Ahmed Ullah, Asim Mushtaq, Rizwan Ahmed Qamar, Zaeem Uddin Ali

Optimization of Organic Waste Biogas Reactor”

Bulgarian Chemical Communications, Volume 52, No. 02, (2020): 214-229.

 

20

Rizwan Ahmed Qamar, Asim Mushtaq*, Ahmed Ullah, Zaeem Uddin Ali

Simulation of Ammonia Looping Dissociation and Formation for Energy Conversion

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Volume 74, No. 01, (2020): 165-188.

 

21

Raza Muhammad Khan, Asim Mushtaq*, Amina Israr and, Asra Nafees 

Comparative Study for Melt Flow Index of High Density Polyethylene, Low Density Polyethylene and Linear Low Density Polyethylene

Pakistan Journal of Engineering and Applied Sciences, Volume 25, July, (2019): 18–25.

22

Raza Muhammad Khan, Asim Mushtaq*, Zaeem Uddin Ali,

Development and Characterization of Walnut Shell and Date Seeds Powder in Low Density Polyethylene

Bulgarian Chemical Communications, Volume 52, No. 01, (2020): 90-97

23

A. Mushtaq , A. Israr , M. Fahad, J. Ahmed

Mechanical analysis of additively manufactured polylactic acid in fused deposition modelling

Bulgarian Chemical Communications, Volume 52, Issue 1 (pp. 29-46) 2020